Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's subtle, doesn't have LED indications or key fobs and is hidden within the vehicle's wiring.
The user may also turn off the system temporarily using Transport Mode when renting their vehicle. This guide will walk you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle against key cloning, hacking and relay attacks. The system is directly connected to the ECU of your car and protected by a pin code that you choose. It's undetectable to thieves using diagnostic scanners or other modern methods, and is not able to be disabled by cutting circuits.
The system is easy to use, however it's essential to use a an expert installation to ensure a clean and secure connection with your vehicle's ECU. Installers who are approved by Thatcham can assist with the installation and programing of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
The first step is to disconnect your battery in order to avoid accidental airbag deployment or short circuits. After this is completed, the installer can safely begin work. Hand tools are the most basic to be used for precise connections. A multimeter can be used to verify electrical values. Insulation tape and cable tie are essential to protect connections and ensure that wiring is neat. The Ghost Immobiliser user's guide will provide specific guidelines tailored to your model.
It is crucial to select the right grounding spot that is free of paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H & the CAN L are connected to the proper ECU ports. The wires can be plugged into or soldered depending on the model. A top-quality connector is recommended to ensure a durable and reliable connection.
After the installation is completed, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking or mechanics without having to know the pin code. To accomplish this, the user must hit the button for service on the dashboard 5 times within 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's an excellent choice for those who rent out their vehicles regularly on platforms like Turo. Having an immobiliser can also reduce insurance premiums, since it significantly decreases the risk of theft.
Getting Started
You won't have a problem using an autowatch immobiliser if you want to protect your vehicle from theft. It protects your vehicle from starting even if a criminal steals or copies the key. This is due to its high-tech technology that is designed to stop the car's engine from starting without the correct PIN code is entered.
The device connects to the vehicle's bus system CAN, allowing direct communication with the ECU. It makes use of buttons already on the dashboard and the steering wheel to create a unique sequence that only you know which makes it impossible for someone else to start your car. This is the most secure way to protect your pride and joy. It will ensure that your car's value remains intact if you ever want to sell it.
Installing Ghost's immobiliser is straightforward however, you must follow the directions to avoid electrical problems and system malfunctions. First, you must locate and determine a constant 12V power source as well as an adequate grounding point on the vehicle's chassis. After that, you can begin to connect the wires for the immobiliser. Make sure you use top-quality connectors and soldering techniques to ensure a solid connection. Insulate the connections using heat shrink tubing or insulation tape, or other materials to prevent short circuits in electrical power.
After the wires have been connected, you are able to reconnect the battery and turn on the engine to test the function of the immobiliser. When ghost immobiliser birmingham is functioning correctly then you can put it in a secure location under the dash or elsewhere in the vehicle. Make sure you hide it well to prevent a thief from tampering with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent to car thieves. It provides superior protection against key cloning, hacking, and relay attacks. It isn't able to be disabled unless you know the code. The device is also easy to use and can be put into the service valet mode to ensure that your car isn't activated if you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to prevent vehicle theft. It is directly connected to the vehicle's CAN bus and communicates with the ECU which makes it virtually undetectable as an addition to your car. Ghost Immobiliser doesn't interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanning devices. This is because the system doesn't transmit and receive radio frequency signals, and it uses the CAN data to communicate with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition in your car and enter your disarm sequence (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. Now you can start your vehicle and drive in a safe manner.
Once installed, Ghost Immobiliser guards your vehicle from hacking or key cloning while preserving its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you have to hand your car to service or valet park.
You'll require a constant power source (12V) as well as an earthing point to complete the installation of a Ghost immobiliser. Make sure that both are properly insulated and can be touched. It is also recommended to use cable ties to tie and secure the wires. This reduces the risk of theft by thieves. To avoid making mistakes, make sure to double-check these points and mark them with the use of tape or labels. Examine all connections for signs that they're wearing out. Connections that are loose can cause problems with the system, so be sure that they're firmly fixed and well-insulated. Also, don't forget test the Ghost Immobiliser after the installation is complete. This will confirm that the unit is operating correctly and that all connections and insulation are safe. Be sure to fix any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your car's ECU to prevent unauthorised motor starting. Its innovative technology protects your car against hacking, key cloning, and other common tactics that thieves employ to steal vehicles. The Ghost works in conjunction with existing tracking and alarm systems to provide the most effective security for your vehicle. The Ghost's unmatched features, combined with its discreet design makes it a preferred option for both drivers who love cars and security-conscious drivers.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, it's important to follow the steps of the installation procedure. Check the wiring diagram for the vehicle as it will aid you in locating and connecting the wires. The next step is to determine the power and grounding sources. Once these are found then you'll need to mark them so that they're easily identifiable during the installation process. It's important to use high-quality materials and tools. Basic hand tools can aid in making precise connections. A multimeter will check electrical values, and also ensure safety. Insulation tape and cable ties will keep the connections neat and tidy. A Ghost-specific user's guide is also available.
It is important to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser is working as it should and will stop vehicle starts that are not authorized. It is recommended that you perform this step regularly as part of your regular inspections of the vehicle to ensure the system is operating properly.
After the installation is completed, you can drive your car with confidence. The Ghost will keep your car and its contents safe from would-be thieves, ensuring that nobody can escape with your car without the correct PIN code. The Ghost can also be used with a tracker that is approved by Thatcham to detect any attempt at tampering or theft, allowing you to locate your vehicle if it's stolen.
The Ghost is compatible with a range of vehicles, including those from the majority of major manufacturers. If you're interested in securing your car with this cutting-edge device, call Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Installer who is registered This certification ensures that we follow strict guidelines and procedures when installing our products. This assures customers, insurance companies, and law enforcement agencies that all installations are done safely and in a safe manner.